Wismec Reuleaux RX2/3 - 150W/200W TC ModThe Wismec Reuleaux RX2/3 is a versatile high power mod with plenty of customisable features. From changeable custom logo and upgradeable firmware to a two or three battery configuration.
The battery cover enables you to change your Reuleaux from 2 battery mode to 3 battery mode (or vice versa). To ensure battery safety, the Wismec Reuleaux RX2/3 has a locking feature that keeps them in place and if the cover isn't installed correctly the device cannot be turned on.
The Reuleaux RX2/3 supports temperature controlled coils (Ni, Ti & SS). Naturally, you can also use the device in regular Variable Wattage (VW) or in Temperature Coefficient of Resistance (TCR) mode.
The device has a reverse polarity protection chip on the circuit board and additional protection features installed through the firmware of the mod to make your vaping experience safer.
Wismec Reuleaux RX2/3 Features:
- Requires 2 or 3 *18650 batteries to work (25A+ discharge)
- Size in 2 battery mode : 40,2 * 34,5 * 88,7mm
- Size in 3 battery mode : 40,2 * 50,1 * 88,7mm
- Spring-loaded 510 connector
- Modes : VW, Temperature Ni, Ti, SS and TCR
- Output wattage : 1-150W (2 battery) / 1-200W (3 battery)
- Output voltage : 6V MAX (2 battery) / 9V MAX (3 battery)
- Resistance : 0.05 - 1.5ohm in Temperature mode | 0.1-3.5ohm in VW mode
- Temperature : 100-315'C / 200-600'F (Ni, Ti, SS)
- Reverse Polarity Protection
- Upgradeable firmware with custom logo (Wismec support page)
- Reuleaux RX2/3 (no batteries)
- Back cover for 2 battery mode
- USB Cable
- Warning card
NOTE: It is recommended to charge your batteries with an external charger.
NOTE: Reuleaux RX2/3 doesn't include batteries or an external charger.
You can find an external charger here and the batteries for your mod here.
DO NOTE: While charging your batteries we strongly recommend using safe charging bag