Traffic Roots Audience Pixel

Your Bag


Your bag is currently empty.

Continue shopping


Review Bag

Discounts will be calculated at checkout




Variable Voltage, or VV, Mods are all the rage in the electronic cigarette world and now another device has launched its VV version. The latest VV Mod is the Gripper VV Mod and is the newest addition to the VV Mod family at ECigWizard. Taking an IMR 18650 battery, the Gripper Mod VV is just like the LavaTube in that it operates from 3.0V to 6.0V at increments of 0.1V so that it can be used at the exact and desired voltage that you require. However, this is where the similarities between the Gripper VV Mod and the LavaTube end really mainly due to its design and size. The Gripper Mod is known for its small, compact size and many vapers choose this device as it is discreet and perfect for public use. You will be pleased to know then that the Gripper VV Mod still retains all these features and measures in at just 80mm x 54mm x 25mm! Many people don’t actually believe its size until they see it for themselves – you an also be rest assured that it small size does not reflect its performance levels as it still packs a punch!

The Gripper VV Mod has many fantastic features such as the sealed 510 connector and 5 click lock/unlock feature to ensure safety. Another feature of note is that it has a 4Amp limit meaning dual coil cartomisers and other low resistance devices can now be used at higher voltages! There is also a built-in ohm-meter so you can simply click a button to find out what resistance your cartomisers or atomisers are – once it has displayed this for 5 seconds, it will then go on to display the remaining battery voltage! As far as features go, it doesn’t get much better than that!

Here’s a quick run down of how to get started with your Gripper VV Mod:

  • Click the power button 5 times to turn the device on.
  • Then adjust the voltage to your desired level by using the ‘+’ and ‘-‘ buttons
  • To find out the Ohm level of the attached device to your Gripper VV Mod by clicking on the power button once.
  • Press the button on the top of the device in order to fire up your atomiser or cartomiser
  • Once you have finished with the device, click the power button quickly 5 times, jusy as you did to switch the device on.


If you’re a fan of the Gripper Mod and wan to try the VV model, grab it here.


Leave a comment

Please note, comments must be approved before they are published